Musashi Dispensers | Accessories (2024)

Syringes Musashi Dispensers | Accessories (1)

Features
  • Straight cylinder design
  • Silicone free
  • Original design minimizing expansion and contraction
Clear Syringe
Material: Polypropylene
Capacity Ungraduated Model Graduated Model Dimensions (mm)
(Overall lg x flange lg x OD)		 Minimum Order
1 ml - PSY-1E-M 84.4 x 18 x φ6.6 50 pieces/pack
- PSY-1E2-M 84 x 18 x φ6.7 50 pieces/pack
3 ml PSY-3E - 80.1 x 24.3 x φ11.7 50 pieces/pack
5 ml PSY-5E PSY-5E-M 80 x 27 x φ14.9 50 pieces/pack
10 ml PSY-10E PSY-10E-M 105 x 32 x φ18.3 50 pieces/pack
20 ml PSY-20F PSY-20F-M 105 x 45 x φ26.2 50 pieces/pack
30 ml PSY-30F PSY-30F-M 130 x 45 x φ26.2 50 pieces/pack
50 ml PSY-50F PSY-50F-M 161 x 45 x φ26.2 50 pieces/pack
70 ml PSY-70F - 224.2 x 45 x φ26.5 50 pieces/pack
100 ml PSY-100F - 191 x 60 x φ35.8 20 pieces/pack
* Working pressure:
0.5MPa (5kgf/cm2) maximum at room temperature. Musashi Dispensers | Accessories (2)

Features
  • Reduction of ultraviolet rays (UV) by 99.9%
UV Syringe
Material: Polypropylene
Capacity Ungraduated Model Graduated
Model		 Dimensions (mm)
(Overall lg x flange lg x OD)		 Minimum Order
3 ml PSY-3EU-OR - 80 x 24.3 x φ11.7 50 pieces/pack
5 ml PSY-5EU-OR PSY-5EU-OR-M 80 x 27 x φ14.9 50 pieces/pack
10 ml PSY-10EU-OR PSY-10EU-OR-M 105.3 x 32 x φ18.3 50 pieces/pack
20 ml PSY-20EU-OR PSY-20EU-OR-M 105 x 45 x φ26.1 50 pieces/pack
30 ml PSY-30FU-OR PSY-30FU-OR-M 129.7 x 45 x φ26.2 50 pieces/pack
50 ml PSY-50FU-OR PSY-50FU-OR-M 160.8 x 45 x φ26.1 50 pieces/pack
70 ml PSY-70FU-OR - 224.2 x 45 x φ26.1 50 pieces/pack
* Working pressure:
0.5MPa (5kgf/cm2) maximum at room temperature. Musashi Dispensers | Accessories (3)

Features
  • Elimination of static electricity thanks to its conductive design
Antistatic Syringe
Material: Polypropylene
Capacity Dark Green Color Dimensions (mm)
(Overall lg x flange lg. x OD)		 Minimum Order
10 ml PSY-10E-SEP 105.5 x 32 x φ18.3 50 pieces/pack
20 ml PSY-20E-SEP 130 x 45 x φ26.2 50 pieces/pack
50 ml PSY-30E-SEP 161.5 x 45 x φ26.2 50 pieces/pack
* Working pressure:
0.5MPa (5kgf/cm2) maximum for PSY-10E-SEP and
0.3MPa (3kgf/cm2) maximum for PSY-30E-SEP and PSY-50E-SEP at room temperature. Musashi Dispensers | Accessories (4)

Features

See Also
TREVALA PX SPINNING | JIGGING | RODS | PRODUCTABS Bendix Fault Code List (Troubleshooting and Reset Guide)Clutch Release Solenoid 1 (C5) – Coarse Fill (TRTS0950)
  • Best suited for operations at high temperatures and pressures
Stainless Syringe
Material: SUS303
Capacity Model Dimensions (mm)
(Overall lg x flange lg. x OD)		 Minimum Order
1 ml SSY-1B 85 x 18 x φ6.6 1 piece
3 ml SSY-3B 84 x 24 x φ11 1 piece
5 ml SSY-5C 80 x 27 x φ14.7 1 piece
10 ml SSY-10C 88 x 32 x φ18 1 piece
30 ml SSY-30C 130 x 45 x φ25.8 1 piece
50 ml SSY-50C 161 x 45 x φ25.8 1 piece

Return to "Products List"
Caps Musashi Dispensers | Accessories (5) Head Cap
Material: Polypropylene
Syringe Capacity (1)Standard
Model		 (2)UV Material
Model		 (3)Standard
with Hook		 Minimum Order
1 ml HC-1E - HC-1E-H(*) 50 pieces/pack
3 ml HC-3E HC-3EU-B - 50 pieces/pack
5 ml HC-5E HC-5U-B - 50 pieces/pack
10 ml HC-10C HC-10U-B - 50 pieces/pack
20-70 ml HC-50E HC-50EU-B - 50 pieces/pack
100 ml HC-100E - - 50 pieces/pack
*HC-1E-H is PSY-1E2-M exclusive use. Musashi Dispensers | Accessories (6) Needle Cap (Normal Type)
Material: Polypropylene
Syringe Capacity (4)Standard Model (5)UV Material Model Minimum Order
Common for all sizes NC-3E NC-3EU-B 50 pieces/pack
Musashi Dispensers | Accessories (7)

Needle Cap (Knurled Type)
Material: Polyethylene
Syringe Capacity (6)Standard Model (7)Standard Model (8)UV Material Model Minimum Order
Common for all sizes NC-5E NC-7E NC-7E-B 50 pieces/pack

Return to "Products List"
 Plungers
 Musashi Dispensers | Accessories (8)

Features
  • For high-precision dispensing
  • Wonderful response even to low dispensing pressure
Float Wiper Plunger
Material: Polyethylene
Syringe Capacity Model Minimum Order
1 ml FLP-1E(*) 50 pieces/pack
3 ml FLP-3E 50 pieces/pack
5 ml FLP-5E 50 pieces/pack
10 ml FLP-10E 50 pieces/pack
20-70 ml FLP-50E 50 pieces/pack
* FLP-1E is PSY-1E2-M exclusive use Musashi Dispensers | Accessories (9)

Features
  • Significant improvement of performance of wiping fluid inside syringe
  • Prevention of fluid dripping
Miracle Wiper Plunger (White)
Material: Polyethylene
Syringe Capacity Model Minimum Order
5 ml MLP-5E 50 pieces/pack
10 ml MLP-10E 50 pieces/pack
20 to 70 ml MLP-50E 50 pieces/pack
Musashi Dispensers | Accessories (10)

Features
  • Significant improvement of performance of wiping fluid inside syringe
  • Prevention of fluid dripping
Miracle Wiper Plunger (Red)
Material: Polyethylene
Syringe Capacity Model Minimum Order
5 ml MLP-R-5E 50 pieces/pack
10 ml MLP-R-10E 50 pieces/pack
20-70 ml MLP-R-50E 50 pieces/pack
Musashi Dispensers | Accessories (11)

Features
  • Significant improvement of performance of wiping fluid inside syringe
  • Prevention of fluid dripping
Miracle Wiper Plunger (Blue)
Material: Polyethylene
Syringe Capacity Model Minimum Order
5 ml MLP-B-5E 50 pieces/pack
10 ml MLP-B-10E 50 pieces/pack
20-70 ml MLP-B-50E 50 pieces/pack

Return to "Products List"
 Adapter Tubes
 Musashi Dispensers | Accessories (12)

Features
  • For high-precision dispensing
  • Wonderful response even to low dispensing pressure
Adapter Tube


Adapter Material: Polyethylene
Tube Material: Special elastomer resin

Syringe Capacity Adaptor Tube Adaptor Tube
with Clamp		 Length
1 ml AT-1E(*2*3) - 1m
3 ml AT-3E-H AT-3E-H-C 1m
5 ml AT-5E-H AT-5E-H-C 1m
10 ml AT-10E-H AT-10E-H-C 1m
20-70 ml AT-50E-H AT-50E-H-C 1m
20-70 ml (for Σ) AT-50E-H-SIGMA - 1m
100 ml AT-100E(*3) - 1m
When ordering, spcify the length in 0.5m units.
e.g. To order a 1.5m-long tube adaptor for 10ml sryringe, you would write "AT-10E-1.5M".
The tube length cannbe specified for the Tube with Clapmer.
*2: AT-1E, PSY-1E-M is for exclusive use.
*3: AT-1E, AT-100E do not have type with stopper.
 Musashi Dispensers | Accessories (13)

Features
  • For the case that the plastic connector is used on the dispenser side
Adapter Tube for Plastic Connector

Adapter Material: Polyethylene
Tube Material: Polyurethane
O-ring Material: Viton

Syringe Capacity Φ4 type
(with tube clamp)
Model		 Φ6 type
(with tube clamp)
Model		 Length
3 ml AT-3E-H-P4C AT-3E-H-P6C 1m
5 ml AT-5E-H-P4C AT-5E-H-P6C 1m
10 ml AT-10E-H-P4C AT-10E-H-P6C 1m
20-70 ml AT-50E-H-P4C AT-50E-H-P6C 1m
Note: Tube length cannot be changed Musashi Dispensers | Accessories (14)

Features
  • Elimination of static electricity thanks to its conductive design
  • We recommend that you use this product in conjunction with our antistatic syringe
Antistatic Adapter Tube


Adapter Material: Polyethylene
Tube Material: Polyurethane
O-ring Material: Viton

Syringe Capacity Model Length
10 ml AT-10E-H-SEP 1m
30, 50 ml AT-50E-H-SEP 1m
30, 50 ml (for Σ) AT-50E-H-SEP-SIGMA 1m
When ordering, spcify the length in 0.5m units.
e.g. To order a 1.5m-length antistatic adapter tube for a 10ml syringe, you would write "AT-10E-SEP-1.5M".
Return to "Products List"
 Adapter Tube O-Rings
 Musashi Dispensers | Accessories (15)Features
  • Spare O-ring for adapter tube
  • Selectable in accordance with fluid characteristics
Adapter Tube O-Ring


O-ring Material: Viton/Silicone/Nitrile Rubber/Perfluoroelastomer

Syringe Capacity (1)Viton (2)Silicone (3)Nitrile rubber (4)Perluoroelastomer Minimum Order
1 ml ORG-1.5-V-B-1 ORG-1.5-S-R-1 ORG-1.5-N-B-1 ORG-1.5-P-B-1 20 pcs/pack
3 ml ORG-6-V-B-1 ORG-6-S-R-1 ORG-6-N-B-1 ORG-6-P-B-1 20 pcs/pack
5 ml ORG-9-V-B-1 ORG-9-S-R-1 ORG-9-N-B-1 ORG-9-P-B-1 20 pcs/pack
10 ml ORG-11-V-B-1 ORG-11-S-R-1 ORG-11-N-B-1 ORG-11-P-B-1 20 pcs/pack
20-70 ml ORG-18-V-B-1 ORG-18-S-R-1 ORG-18-N-B-1 ORG-18-P-B-1 20 pcs/pack
100 ml ORG-24-V-B-1 ORG-24-S-R-1 ORG-24-N-B-1 ORG-24-P-B-1 20 pcs/pack

Return to "Products List"
 Metal Needles Musashi Dispensers | Accessories (16)Features
  • Adoption of Durable SUS Needle
  • Needle Length: 13mm & 15mm
Metal Needle SNA series
(Metal Needles with High Durability)

Material:
Needle: SUS304
Base: Brass (Nickel-Plated)

Gauge I.D. (mm) O.D. (mm) Needle Length
13mm Model		 Needle Length
15mm Model		 Minimum Order
12 2.27 2.77 SNA-12G-B SNA-12G-C 60 pcs./ pack
13 1.94 2.40 SNA-13G-B SNA-13G-C 60 pcs./ pack
14 1.64 2.10 SNA-14G-B SNA-14G-C 60 pcs./ pack
15 1.43 1.83 SNA-15G-B SNA-15G-C 60 pcs./ pack
16 1.25 1.65 SNA-16G-B SNA-16G-C 60 pcs./ pack
17 1.11 1.49 SNA-17G-B SNA-17G-C 60 pcs./ pack
18 0.92 1.28 SNA-18G-B SNA-18G-C 60 pcs./ pack
19 0.72 1.08 SNA-19G-B SNA-19G-C 60 pcs./ pack
20 0.61 0.91 SNA-20G-B SNA-20G-C 60 pcs./ pack
21 0.52 0.82 SNA-21G-B SNA-21G-C 60 pcs./ pack
22 0.42 0.72 SNA-22G-B SNA-22G-C 60 pcs./ pack
23 0.34 0.64 SNA-23G-B SNA-23G-C 60 pcs./ pack
24 0.31 0.57 SNA-24G-B SNA-24G-C 60 pcs./ pack
25 0.26 0.52 SNA-25G-B SNA-25G-C 60 pcs./ pack
26 0.25 0.46 SNA-26G-B SNA-26G-C 60 pcs./ pack
27 0.21 0.42 SNA-27G-B SNA-27G-C 60 pcs./ pack
28 0.18 0.36 SNA-28G-B SNA-28G-C 60 pcs./ pack
30 0.14 0.32 SNA-30G-B SNA-30G-C 60 pcs./ pack

Musashi Dispensers | Accessories (17)Features
  • Disposable Type
  • Needle Length: 8mm & 13mm

Plastic NeedleMaterial:
Needle: SUS304
Base: Polyacetal

Gauge I.D.
(mm)		 O.D.
(mm)		 Color Needle Length
8mm Model		 Needle Length
13mm Model		 Minimum Order
15 2.27 2.77 Brown PN15G-A PN15G-B 50 pcs./ pack
16 1.94 2.40 Black PN16G-A PN16G-B 50 pcs./ pack
17 1.64 2.10 Blue PN17G-A PN17G-B 50 pcs./ pack
18 1.43 1.83 Gray PN18G-A PN18G-B 50 pcs./ pack
19 1.25 1.65 Light Green PN19G-A PN19G-B 50 pcs./ pack
20 1.11 1.49 Light Pink PN20G-A PN20G-B 50 pcs./ pack
21 0.92 1.28 White PN21G-A PN21G-B 50 pcs./ pack
22 0.72 1.08 Light Blue PN22G-A PN22G-B 50 pcs./ pack
23 0.61 0.91 Yellow PN23G-A PN23G-B 50 pcs./ pack
24 0.52 0.82 Ivory PN24G-A PN24G-B 50 pcs./ pack
25 0.42 0.72 Pink PN25G-A PN25G-B 50 pcs./ pack
26 0.34 0.64 Peppermint Green PN26G-A PN26G-B 50 pcs./ pack
27 0.31 0.57 Brown PN27G-A PN27G-B 50 pcs./ pack
Musashi Dispensers | Accessories (18)Features
  • Reliable and Sure Fitting
  • Secure Needle Mounting
Double Thread Screwed Plastic NeedleMaterial:
Needle: SUS304
Base: Polypropylene

Gauge I.D.
(mm)		 O.D.
(mm)		 Color Needle Length
12.7mm Model		 Needle Length
25.4mm Model		 Needle Length
38.1mm Model		 Minimum Order
14 1.52 1.83 Dark Green DPN-14G-1 DPN-14G-2 DPN-14G-3 50 pcs./ pack
15 1.37 1.65 Brown DPN-15G-1 DPN-15G-2 DPN-15G-3 50 pcs./ pack
18 0.84 1.27 Green DPN-18G-1 DPN-18G-2 DPN-18G-3 50 pcs./ pack
20 0.58 0.91 Pink DPN-20G-1 DPN-20G-2 DPN-20G-3 50 pcs./ pack
21 0.51 0.81 Purple DPN-21G-1 DPN-21G-2 DPN-21G-3 50 pcs./ pack
22 0.41 0.71 Blue DPN-22G-1 DPN-22G-2 DPN-22G-3 50 pcs./ pack
23 0.33 0.64 Orange DPN-23G-1 DPN-23G-2 DPN-23G-3 50 pcs./ pack
25 0.25 0.51 Red DPN-25G-1 DPN-25G-2 DPN-25G-3 50 pcs./ pack
27 0.20 0.41 Clear DPN-27G-1 - - 50 pcs./ pack
30 0.15 0.30 Light Purple DPN-30G-1 - - 50 pcs./ pack
22 0.10 0.23 Yellow DPN-32G-1 - - 50 pcs./ pack

Musashi Dispensers | Accessories (19)Features
  • Suitable for Innter Surfaces of Workpiece
Curve NeedleMaterial:
Needle: SUS304
Base: Polypropylene

Gauge I.D.
(mm)		 O.D.
(mm)		 Color Angle: 45º
Needle Length
12.7mm Model		 Angle: 45º
Needle Length
38.1mm Model		 Angle: 90º
Needle Length
12.7mm Model		 Minimum Order
14 1.52 1.83 Dark Green CPN-14G-A45 CPN-14G-B45 CPN-14G-A90 50 pcs./ pack
15 1.37 1.65 Brown CPN-15G-A45 - CPN-15G-A90 50 pcs./ pack
18 0.84 1.27 Green CPN-18G-A45 CPN-18G-B45 CPN-18G-A90 50 pcs./ pack
20 0.58 0.91 Pink CPN-20G-A45 - CPN-20G-A90 50 pcs./ pack
21 0.51 0.81 Purple CPN-21G-A45 CPN-21G-B45 CPN-21G-A90 50 pcs./ pack
22 0.41 0.71 Blue CPN-22G-A45 - CPN-22G-A90 50 pcs./ pack
23 0.33 0.64 Orange CPN-23G-A45 - CPN-23G-A90 50 pcs./ pack
25 0.25 0.51 Red CPN-25G-A45 - CPN-25G-A90 50 pcs./ pack
27 0.20 041 Clear CPN-27G-A45 - CPN-27G-A90 50 pcs./ pack
30 0.15 0.30 Light Purple CPN-30G-A45 - CPN-30G-A90 50 pcs./ pack


Return to "Products List" Resin Needles and Nozzles
 Musashi Dispensers | Accessories (20)Features
  • Soft Material to avoid the damage to workpiece
  • Applicable to anaerobic material dispensing
Teflon NeedleMaterial:
Needle: Teflon
Base: Polyacetal

Gauge I.D. (mm) O.D. (mm) Color Needle Length
8mm Model		 Minimum Order
13 1.50 2.10 Ivory TN-13G 50 pcs./ pack
14 1.35 1.95 Blue TN-14G 50 pcs./ pack
15 1.19 1.79 Gray TN-15G 50 pcs./ pack
16 1.07 1.67 Ivory TN-16G 50 pcs./ pack
17 0.96 1.56 Yellow TN-17G 50 pcs./ pack
18 0.86 1.46 Gray TN-18G 50 pcs./ pack
19 0.68 1.18 Light Green TN-19G 50 pcs./ pack
20 0.56 1.06 Light Pink TN-20G 50 pcs./ pack
21 0.46 0.92 Light Blue TN-21G 50 pcs./ pack
22 0.38 0.84 White TN-22G 50 pcs./ pack

Musashi Dispensers | Accessories (21)Features
  • For Dispensing anaerobic fluids with high precision
  • SUS Guide to prebent needlepoint unsteadiness
Teflon Needle with SUS GuideMaterial:
Needle: Teflon
Base: Polyacetal
Guide: SUS304

Gauge I.D. (mm) O.D. (mm) Color Model Minimum Order
16 1.07 2.42 Ivory TN-16G-〈〈L-13G-∆∆L 1 pc
17 0.96 2.01 Yellow TN-17G-〈〈L-14G-∆∆L 1 pc
18 0.86 2.01 Gray TN-18G-〈〈L-14G-∆∆L 1 pc
19 0.68 1.82 Light Green TN-19G-〈〈L-15G-∆∆L 1 pc
20 0.56 1.67 Light Pink TN-20G-〈〈L-16G-∆∆L 1 pc
21 0.46 1.56 Light Blue TN-21G-〈〈L-17G-∆∆L; 1 pc
22 0.38 1.22 Brown TN-22G-〈〈L-18G-∆∆L 1 pc
Note 1:
- Enter the Teflon Needle Length in "〈〈": 4 ≤ 〈〈 ≤ 50 (mm)
- Enter the SUS Guide Length in "∆∆": 3 ≤ ∆∆ ≤ 49 (mm) (SUS guide should be 1mm shorter than needle)
Note 2:
- To order Teflon Needle with SUS Guide, needle length should be deterimined first.
(e.g.: "TN19G-20L-15G-19L" is 20mm-long 19G teflon needle)

Ultra-Fine Needle TypeMaterial:
Needle: Teflon
Base: Polypropylene
Guide: SUS304

I.D. (mm) O.D. (mm) Color Needle Length
13.7mm Model		 Needle Length
26.4mm Model		 Minimum Order
0.3 0.5 Pink TN-0.3-13.7-SUSG TN-0.3-26.4-SUSG 1 pc
0.2 0.4 Purple TN-0.2-13.7-SUSG TN-0.2-26.4-SUSG 1 pc
0.1 0.3 Orange TN-0.1-13.7-SUSG TN-0.1-26.4-SUSG 1 pc
Musashi Dispensers | Accessories (22)Features
  • Soft material to avoid damage to workpiece
  • Applicable to anaerobic material dispensing
Soft NeedleMaterial:
Needle: Polypropylene
Base: Polypropylene

Gauge I.D. (mm) O.D. (mm) Color Model Minimum Order
15 1.37 1.83 Dark Gray PPN-15G 50 pcs./ pack
16 1.19 1.70 Brown PPN-16G 50 pcs./ pack
18 0.81 1.35 Pink PPN-18G 50 pcs./ pack
20 0.61 0.99 Yellow PPN-20G 50 pcs./ pack
22 0.38 0.81 Brack PPN-22G 50 pcs./ pack
25 0.33 0.74 Red PPN-25G 50 pcs./ pack
Needle Length: 35.9mm
Overall Length: 55.6mm
 Musashi Dispensers | Accessories (23)Features
  • For high viscosity material
Double Thread Screwed Tapered NozzleMaterial: Polyethylene
Gauge I.D. (mm) Color Model Needle Length
(mm)		 Minimum Order
12 2.40 Red TPND-12G-U 31.8 50 pcs./ pack
14 1.60 Dark green TPND-14G-U 31.8 50 pcs./ pack
16 1.19 Black TPND-16G-U 31.8 50 pcs./ pack
18 0.84 Light green TPND-18G-U 31.8 50 pcs./ pack
20 0.61 Pink TPND-20G-U 31.8 50 pcs./ pack
22 0.40 Blue TPND-22G-U 31.8 50 pcs./ pack
25 0.25 Red TPND-25G-U 31.8 50 pcs./ pack
27 0.20 Dark gray TPND-27G-U 31.8 50 pcs./ pack
30 0.15 Olive TPND-30G-U 31.8 50 pcs./ pack


Return to "Products List" High-Precision Nozzles
 Musashi Dispensers | Accessories (24)Features
  • Suitable for ultra-small volume dispensing and ultra-fine drawing
  • 12 types: from 20µm (min.) up to 600µmm (max.) of I.D.
Super-Fine NozzleMaterial:
Base: Brass (Nickel-plated)

I.D. (mm) O.D. (mm) Luerlock Type Double Thread
ScrewType		 Minimum Order
0.60 0.70 FN-0.60N FN-0.60ND 1 pce./ pack
0.50 0.60 FN-0.50N FN-0.50ND 1 pce./ pack
0.40 0.50 FN-0.40N FN-0.40ND 1 pce./ pack
0.30 0.40 FN-0.30N FN-0.30ND 1 pce./ pack
0.25 0.35 FN-0.25N FN-0.25ND 1 pce./ pack
0.20 0.30 FN-0.20N FN-0.20ND 1 pce./ pack
0.15 0.25 FN-0.15N FN-0.15ND 1 pce./ pack
0.10 0.20 FN-0.10N FN-0.10ND 1 pce./ pack
0.05 0.15 FN-0.05N FN-0.05ND 1 pce./ pack
0.04 0.14 FN-0.04N FN-0.04ND 1 pce./ pack
0.03 0.13 FN-0.03N FN-0.03ND 1 pce./ pack
0.02 0.12 FN-0.02N FN-0.02ND 1 pce./ pack
Nozzle Tip with 15-Micrometer Thickness Type
I.D. (mm) O.D. (mm) Luerlock Type Double Thread
ScrewType		 Minimum Order
0.60 0.63 FN-0.60N-F FN-0.60ND-F 1 pce./ pack
0.50 0.53 FN-0.50N-F FN-0.50ND-F 1 pce./ pack
0.40 0.43 FN-0.40N-F FN-0.40ND-F 1 pce./ pack
0.30 0.33 FN-0.30N-F FN-0.30ND-F 1 pce./ pack
0.25 0.28 FN-0.25N-F FN-0.25ND-F 1 pce./ pack
0.20 0.23 FN-0.20N-F FN-0.20ND-F 1 pce./ pack
0.15 0.18 FN-0.15N-F FN-0.15ND-F 1 pce./ pack
0.10 0.13 FN-0.10N-F FN-0.10ND-F 1 pce./ pack
0.05 0.08 FN-0.05N-F FN-0.05ND-F 1 pce./ pack
0.04 0.07 FN-0.04N-F FN-0.04ND-F 1 pce./ pack
0.03 0.06 FN-0.03N-F FN-0.03ND-F 1 pce./ pack
0.02 0.05 FN-0.02N-F FN-0.02ND-F 1 pce./ pack
Musashi Dispensers | Accessories (25)Features
  • Integral Structure
  • Tapered Shape
  • Ultra-Thinned Nozzle Tip

Precision Solid NozzleMaterial: SUS303

I.D. (mm) Model Minimum Order
0.50 SHN-0.5N 1 pce./ pack
0.45 SHN-0.45N 1 pce./ pack
0.40 SHN-0.4N 1 pce./ pack
0.35 SHN-0.35N 1 pce./ pack
0.30 SHN-0.3N 1 pce./ pack
0.25 SHN-0.25N 1 pce./ pack
0.20 SHN-0.2N 1 pce./ pack
0.15 SHN-0.15N 1 pce./ pack
0.10 SHN-0.1N 1 pce./ pack
Musashi Dispensers | Accessories (26)Features
  • High-Precision Dispensing of Material with Fillers

Precision NozzleMaterial:
Needle: SUS303
Base: Brass (Nickel-Plated)

I.D. (mm) O.D. (mm) Luerlock Type Double Thread
Screw Type		 Minimum Order
0.60 0.80 HN-0.6N HN-0.6ND 1 pce./ pack
0.50 0.70 HN-0.5N HN-0.5ND 1 pce./ pack
0.40 0.6 HN-0.4N HN-0.4ND 1 pce./ pack
0.30 0.50 HN-0.3N HN-0.3ND 1 pce./ pack
0.25 0.45 HN-0.25N HN-0.25ND 1 pce./ pack
0.20 0.40 HN-0.2N HN-0.2ND 1 pce./ pack
0.15 0.25 HN-0.15N HN-0.15ND 1 pce./ pack
0.10 0.20 HN-0.1N HN-0.1ND 1 pce./ pack
Musashi Dispensers | Accessories (27)Features
  • For Small Volume Dispensing
  • Tapered needle tip
  • Needle base with double thread screwed design

Sharp NeedleMaterial:
Needle: SUS304
Base: Polypropylene

I.D. (mm) Tip O.D.
(mm)		 Color Overall Length (A)
(mm)		 Needle Length (B)
(mm)		 Model Minimum Order
0.84 1.00 Green 30.3 12.7 SPN-0.84-12.7L 50 pcs./ pack
0.58 0.74 Pink 55.7 38.1 SPN-0.58-38.1L 50 pcs./ pack
0.41 0.52 Blue 55.7 38.1 SPN-0.41-38.1L 50 pcs./ pack
0.33 0.44 Orange 30.3 12.7 SPN-0.33-12.7L 50 pcs./ pack
0.25 0.34 Red 30.3 12.7 SPN-0.25-12.7L 50 pcs./ pack
0.17 0.26 Peppermint Green 27.1 9.5 SPN-0.17-9.5L 50 pcs./ pack
0.12 0.19 Gray 24.0 6.5 SPN-0.12-6.5L 50 pcs./ pack

Return to "Products List" Special Nozzles
 Musashi Dispensers | Accessories (28)Features
  • For 2-point simultaneous dispensing
Twin NeedleMaterial:
Needle: SUS304
Base: Brass (Nickel-Plated)

Gauge I.D. (mm) O.D. (mm) Needle Length: 20mm
Needle Pitch: 2mm
Model		 Minimum Order
16 1.19 1.67 DN-16G 1 pce./ pack
17 1.04 1.56 DN-17G 1 pce./ pack
18 0.86 1.22 DN-18G 1 pce./ pack
19 0.68 1.00 DN-19G 1 pce./ pack
20 0.58 0.91 DN-20G 1 pce./ pack
21 0.49 0.83 DN-21G 1 pce./ pack
22 0.39 0.72 DN-22G 1 pce./ pack
23 0.32 0.63 DN-23G 1 pce./ pack
24 0.29 0.57 DN-24G 1 pce./ pack
25 0.26 0.50 DN-25G 1 pce./ pack
26 0.24 0.46 DN-26G 1 pce./ pack
27 0.20 0.41 DN-27G 1 pce./ pack
28 0.15 0.35 DN-28G 1 pce./ pack
Musashi Dispensers | Accessories (29)Features
  • For 3-point simultaneous dispensing
3-pin NeedleMaterial:
Needle: SUS304
Base: Brass (Nickel-Plated)

Gauge I.D. (mm) O.D. (mm) Needle Length: 20mm
Needle Pitch: 2mm
Model		 Minimum Order
18 0.86 1.22 DN-18G-3P 1 pce./ pack
19 0.68 1.00 DN-19G-3P 1 pce./ pack
20 0.58 0.91 DN-20G-3P 1 pce./ pack
21 0.49 0.83 DN-21G-3P 1 pce./ pack
22 0.39 0.72 DN-22G-3P 1 pce./ pack
23 0.32 0.63 DN-23G-3P 1 pce./ pack
24 0.29 0.57 DN-24G-3P 1 pce./ pack
25 0.26 0.50 DN-25G-3P 1 pce./ pack
26 0.24 0.46 DN-26G-3P 1 pce./ pack
27 0.20 0.41 DN-27G-3P 1 pce./ pack
28 0.15 0.35 DN-28G-3P 1 pce./ pack
Musashi Dispensers | Accessories (30)Features
  • For 4-point simultaneous dispensing
4-pin NeedleMaterial:
Needle: SUS304
Base: Brass (Nickel-Plated)

Gauge I.D. (mm) O.D. (mm) Needle Length: 20mm
Needle Pitch: 2mm
Model		 Minimum Order
21 0.49 0.83 DN-21G-4P 1 pce./ pack
22 0.39 0.72 DN-22G-4P 1 pce./ pack
23 0.32 0.63 DN-23G-4P 1 pce./ pack
24 0.29 0.57 DN-24G-4P 1 pce./ pack
25 0.26 0.50 DN-25G-4P 1 pce./ pack
26 0.24 0.46 DN-26G-4P 1 pce./ pack
27 0.20 0.41 DN-27G-4P 1 pce./ pack
28 0.15 0.35 DN-28G-4P 1 pce./ pack
Musashi Dispensers | Accessories (31)Features
  • For Multipoint simultaneous dispensing
  • Applicable to various dispensing patterns
Multi NeedleMaterial:
Needle: SUS304
Base: SUS303

Needle Base Size (A:Width, B:Height)
Model Dimension A (mm) Dimension B (mm)
MN-10 10 15
MN-13 13 19
MN-15 15 22
MN-17 17 22
MN-19 19 22
MN-21 21 22
MN-23 23 25
MN-25 25 25
MN-27 27 25

Needle Inner and Outer Diameters
Gauge Dimension A (mm) Dimension B (mm)
12 2.30 2.99
13 1.80 2.42
14 1.58 2.01
15 1.37 1.82
16 1.19 1.67
17 1.04 1.56
18 0.86 1.22
19 0.68 1.00
20 0.58 0.91
21 0.49 0.83
22 0.39 0.72
23 0.32 0.63
24 0.29 0.57
25 0.26 0.50
26 0.24 0.46
27 0.20 0.41
28 0.15 0.35

Note 1: When ordering nozzles, please specify the needle type, arrangement, gauge and length.
Note 2: Please contact to sales[at]musashius.com, when ordering a nozzle not listed above.
Return to "Products List"
Musashi Dispensers | Accessories (2024)
Top Articles
2024 Ford Bronco Review: Yes, it's awesome, but ... - Autoblog
Ford Bronco Hybrid/Bronco Sport Hybrid: Everything we know thus far
Latest Posts
Starbucks Pumpkin Scones Recipe - Cooking Classy
Key, tempo & popularity of Pink Cadillac By Natalie Cole | Musicstax
Article information

Author: Barbera Armstrong

Last Updated:

Views: 5506

Rating: 4.9 / 5 (59 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Barbera Armstrong

Birthday: 1992-09-12

Address: Suite 993 99852 Daugherty Causeway, Ritchiehaven, VT 49630

Phone: +5026838435397

Job: National Engineer

Hobby: Listening to music, Board games, Photography, Ice skating, LARPing, Kite flying, Rugby

Introduction: My name is Barbera Armstrong, I am a lovely, delightful, cooperative, funny, enchanting, vivacious, tender person who loves writing and wants to share my knowledge and understanding with you.